Dear all, thanks for the help. I'm going to try using E1 gateway to convert sip to e1.
-ikka- On Fri, Sep 16, 2016 at 3:28 AM, C F <shma...@gmail.com> wrote: > Use a sip to PRI gateway or a PRI card in the asterisk system. Connect > that to the Panasonic TDA600 using a PRI card on the panasonic side > (KX-TDA0290). > this will be the most worry free solution. > > On Wed, Sep 14, 2016 at 2:05 AM, Harry McGregor <hmcgre...@biggeeks.org> > wrote: > >> Hi, >> >> >> You need to find out more about the configuration of this specific >> TDA600, as it could be either POTS or E1, once you know that, you can >> determine what options are best. >> >> -Harry >> >> On 09/13/2016 10:51 PM, Ikka Tirtawidjaja wrote: >> >> Dear Harry, >> >> Thx for the explanation. >> >> My team manage building's PBX that use Asterisk 13.x. >> We use Asterisk PBX for this buildings that have apartment and office >> customer. >> From my Asterisk PBX, we connect to IPPhone (yealink) or ATA Converter >> (cisco SPA112). >> Others are using PBX like panasonic analog, audiocodes SBC, etc, and we >> use ATA Converter to convert from SIP to Analog (CO Line) >> >> Now, we have a new customer (tenant) that have Panasonic TDA600. >> If we use FXS or ATA Converter, its going to have a lot of that, because >> this tenant going to use about 60 ext / sip line. >> Replacing asterisk PBX on my (company) side or replace TDA600 on my >> customer side is not acceptable. >> So we need to find a "win-win" solution for this. >> >> Thx in advance, >> >> >> Ikka >> >> >> >> >> On Wed, Sep 14, 2016 at 12:40 PM, Harry McGregor <hmcgre...@biggeeks.org> >> wrote: >> >>> Hi, >>> >>> On 09/13/2016 06:51 AM, Ikka Tirtawidjaja wrote: >>> >>> Hi, >>> >>> Is there anyone here who has experience connecting Asterisk (ver 13.8) >>> with PBX Panasonic KX-TDA600 ? >>> >>> The architecture more less like this : >>> >>> >>> Telco Sip Trunk ---> Asterisk 13 ---> Panasonic KX-TDA600 ---> Phone / >>> Fax >>> >>> >>> What connectivity do you currently use for the KX-TDA600? E1, T1, POTS, >>> BRI? >>> >>> Others have suggested a SIP to E1/T1 gateway, which would let you skip >>> the asterisk box, if you don't have other uses for it. >>> >>> Another option is to use a PCI-E E1/T1 interface card in the asterisk >>> box, especially if you already have an E1 or T1 interface in the KX-TDA600. >>> I personally don't like buying smaller then a dual T1/E1 card, as the price >>> difference between a dual and a single is so small. If the KX-TDA600 is >>> set-up for Analog/POTS, you can use a channel bank on the second T1/E1 >>> port, and feed POTS into the KX-TDA600. >>> >>> For a small installation that wanted to keep their Nortel Key System, >>> and their Telco really wanted to provide a PRI instead of POTS (the Nortel >>> could only take pots), we used a dual T1 PCI card in an asterisk box, ran >>> PRI on the Telco interface, an ADIT 600 channel bank on the second >>> interface, and handed 4 POTS lines to the Nortel Key System. >>> >>> The key is to give your self the most flexibility to change later, and >>> preserve your existing investment. >>> >>> -Harry >>> >>> Thanks in advance, >>> >>> >>> Regards, >>> >>> Ikka - Jakarta, Indonesia >>> >>> >>> >>> >>> -- >>> _____________________________________________________________________ >>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>> >>> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 >>> http://www.asterisk.org/community/astricon-user-conference >>> >>> New to Asterisk? Start here: >>> https://wiki.asterisk.org/wiki/display/AST/Getting+Started >>> >>> asterisk-users mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-users >>> >> >> >> >> >> >> -- >> _____________________________________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 >> http://www.asterisk.org/community/astricon-user-conference >> >> New to Asterisk? Start here: >> https://wiki.asterisk.org/wiki/display/AST/Getting+Started >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 > http://www.asterisk.org/community/astricon-user-conference > > New to Asterisk? Start here: > https://wiki.asterisk.org/wiki/display/AST/Getting+Started > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016 http://www.asterisk.org/community/astricon-user-conference New to Asterisk? Start here: https://wiki.asterisk.org/wiki/display/AST/Getting+Started asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users