Hi,
You need to find out more about the configuration of this specific
TDA600, as it could be either POTS or E1, once you know that, you can
determine what options are best.
-Harry
On 09/13/2016 10:51 PM, Ikka Tirtawidjaja wrote:
Dear Harry,
Thx for the explanation.
My team manage building's PBX that use Asterisk 13.x.
We use Asterisk PBX for this buildings that have apartment and office
customer.
From my Asterisk PBX, we connect to IPPhone (yealink) or ATA Converter
(cisco SPA112).
Others are using PBX like panasonic analog, audiocodes SBC, etc, and
we use ATA Converter to convert from SIP to Analog (CO Line)
Now, we have a new customer (tenant) that have Panasonic TDA600.
If we use FXS or ATA Converter, its going to have a lot of that,
because this tenant going to use about 60 ext / sip line.
Replacing asterisk PBX on my (company) side or replace TDA600 on my
customer side is not acceptable.
So we need to find a "win-win" solution for this.
Thx in advance,
Ikka
On Wed, Sep 14, 2016 at 12:40 PM, Harry McGregor
<hmcgre...@biggeeks.org <mailto:hmcgre...@biggeeks.org>> wrote:
Hi,
On 09/13/2016 06:51 AM, Ikka Tirtawidjaja wrote:
Hi,
Is there anyone here who has experience connecting Asterisk (ver
13.8) with PBX Panasonic KX-TDA600 ?
The architecture more less like this :
Telco Sip Trunk ---> Asterisk 13 ---> Panasonic KX-TDA600 --->
Phone / Fax
What connectivity do you currently use for the KX-TDA600? E1, T1,
POTS, BRI?
Others have suggested a SIP to E1/T1 gateway, which would let you
skip the asterisk box, if you don't have other uses for it.
Another option is to use a PCI-E E1/T1 interface card in the
asterisk box, especially if you already have an E1 or T1 interface
in the KX-TDA600. I personally don't like buying smaller then a
dual T1/E1 card, as the price difference between a dual and a
single is so small. If the KX-TDA600 is set-up for Analog/POTS,
you can use a channel bank on the second T1/E1 port, and feed POTS
into the KX-TDA600.
For a small installation that wanted to keep their Nortel Key
System, and their Telco really wanted to provide a PRI instead of
POTS (the Nortel could only take pots), we used a dual T1 PCI card
in an asterisk box, ran PRI on the Telco interface, an ADIT 600
channel bank on the second interface, and handed 4 POTS lines to
the Nortel Key System.
The key is to give your self the most flexibility to change later,
and preserve your existing investment.
-Harry
Thanks in advance,
Regards,
Ikka - Jakarta, Indonesia
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Join the Asterisk Community at the 13th AstriCon, September 27-29,
2016
http://www.asterisk.org/community/astricon-user-conference
<http://www.asterisk.org/community/astricon-user-conference>
New to Asterisk? Start here:
https://wiki.asterisk.org/wiki/display/AST/Getting+Started
<https://wiki.asterisk.org/wiki/display/AST/Getting+Started>
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
<http://lists.digium.com/mailman/listinfo/asterisk-users>
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Join the Asterisk Community at the 13th AstriCon, September 27-29, 2016
http://www.asterisk.org/community/astricon-user-conference
New to Asterisk? Start here:
https://wiki.asterisk.org/wiki/display/AST/Getting+Started
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
