Hi all, I have 3 * boxes all running the same OS and software version. Machine A has an X100P card, machines B and C do not. They all have the same dialplan.
I can dial from machine A to either of the other 2 with no problem. I can dial from either of the other 2 to machine A with no problem. I cannot dial from B to C or vice versa. What's really wierd is that I can dial from machine B through machine A to machine C. The IAX2 session then drops machine A from the picture and continues directly between B and C. The same happens in reverse. Why can I not dial directly from B to C? Do B and C require X100P cards before IAX2 will work correctly? I don't think this is the case because the call can be passed to them after it has been setup via A. Its really bugging me. Any ideas? G7LTT/KC2ENI Mark Phillips _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users