I'm using the guest account that comes in the default setup files and I don't register any of the machines.
> On Wed, 2004-04-21 at 17:31, Mark Phillips wrote: >> Hi all, >> >> I have 3 * boxes all running the same OS and software version. Machine A >> has an X100P card, machines B and C do not. They all have the same >> dialplan. >> >> I can dial from machine A to either of the other 2 with no problem. I >> can >> dial from either of the other 2 to machine A with no problem. I cannot >> dial from B to C or vice versa. >> >> What's really wierd is that I can dial from machine B through machine A >> to >> machine C. The IAX2 session then drops machine A from the picture and >> continues directly between B and C. The same happens in reverse. >> >> Why can I not dial directly from B to C? Do B and C require X100P cards >> before IAX2 will work correctly? I don't think this is the case because >> the call can be passed to them after it has been setup via A. >> >> Its really bugging me. Any ideas? > > Is B and C registering to each other like they are to A? > -- > Steven Critchfield <[EMAIL PROTECTED]> > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > G7LTT/KC2ENI Mark Phillips _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
