On Wed, 2004-04-21 at 17:31, Mark Phillips wrote: > Hi all, > > I have 3 * boxes all running the same OS and software version. Machine A > has an X100P card, machines B and C do not. They all have the same > dialplan. > > I can dial from machine A to either of the other 2 with no problem. I can > dial from either of the other 2 to machine A with no problem. I cannot > dial from B to C or vice versa. > > What's really wierd is that I can dial from machine B through machine A to > machine C. The IAX2 session then drops machine A from the picture and > continues directly between B and C. The same happens in reverse. > > Why can I not dial directly from B to C? Do B and C require X100P cards > before IAX2 will work correctly? I don't think this is the case because > the call can be passed to them after it has been setup via A. > > Its really bugging me. Any ideas?
Is B and C registering to each other like they are to A? -- Steven Critchfield <[EMAIL PROTECTED]> _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
