hi, Am Fr, den 02.07.2004 schrieb Scott Stingel um 15:31: > Hi- > > Only pins 1-2 and 4-5 are used, so one of the two cables should work. > (probably the straight through cable) ok > > On your zaptel, you should use the phone company as the source for > asterisk's internal clock, like: why 1 ? - the documention says that 0 means for the card to take the timing from its peer (but now i've tryied 1)
> > span=1,1,0,ccs,hdb3,crc4 > (But I don't think this would make a difference on the red alarm). Also, > try removing crc4 at the end. my telco told me that they are using crc4 - also if i remove it - it does not make any difference > > Did you do the following before starting asterisk? yep - i did so > > modprobe -v wct4xxp > sleep 2 > ztcfg -vv > > When you do these commands, is there an error? > > Also, in your /etc/asterisk/zapata, did you specify: signalling=pri_cpe ? i have signalling=pri_cpi and euroisdn i have really already tryied everything (i've also checked the card with a loop cable - works / and i've already tested the other peer - is also working) - so, what they f... could else be wrong ? > > Regards > Scott Stingel > > > > > Scott M. Stingel > President, > Emerging Voice Technology, Inc. > Palo Alto California & London England > www.evtmedia.com > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Wolfgang Pichler > Sent: Friday, July 02, 2004 4:42 AM > To: Asterisk-Users Mailinglist > Subject: [Asterisk-Users] TE410P PINS > > hi all, > > i am getting crazy with my TE410P - it won't work > > now we already think that the only thing which can be wrong is the cable. > At our telecom endpoint we have 1-2 tx, 4-5 rx So - which cable do i need to > get it working > > Already tried a cross over cable 1-2 -> 4-5 / 4-5 -> 1-2 (with this cable > nothing works -> red alarm on both ends) Also a normal cable 1-2 -> 1-2 / > 4-5 -> 4-5 (with this cable the telecom endpoint gets a signal - but it > seems to be the wrong coding/framing - but the TE410P is still on red alarm) > > so, could it be that it will need a: 4-5 -> 4-5, 1-2 -> 7-8 ? (never heard > about something like this) > > my zaptel.conf is: > ---------------------------- > span=1,0,0,ccs,hdb3,crc4 > bchan=1-15,17-31 > dchan=16 > > loadzone=at > defaultzone=at > ---------------------------- > as you can see i am located in austria - my telco is telekom Austria > > thanks for any help > > best regards > Wolfi > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
