On Tue, 2004-07-06 at 09:06, Scott Stingel wrote: > >>You will have to change signalling to something like a channelized T1 to > use a loopback, >>I think. The PRI has complementary protocols for CPE and > NET sides of the link. Not sure >>if a loopback would come up if it is > configured for CPE. > >>-- > >>Steven Critchfield <[EMAIL PROTECTED]> > > > If I understand what you're trying to do (loop one E1 span to another to see > if the card is defective), this should work fine (I've done it). > > Just loop 1+2 to 4+5, set one span to CPE and the other to NET. You should > get green on both. Calls initiated on channels on one will appear as > inbound calls on the coresponding channels on the other
This is a wonderful example of many eyes looking at a problem. I completely didn't think about the spare ports. I had tunnel vision on looping the port back on itself. -- Steven Critchfield <[EMAIL PROTECTED]> _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
