hi all, Am Fr, den 02.07.2004 schrieb Steven Critchfield um 17:20: > On Fri, 2004-07-02 at 09:56, Wolfgang Pichler wrote: > > hi, > > > > Am Fr, den 02.07.2004 schrieb Scott Stingel um 15:31: > > > Hi- > > > > > > Only pins 1-2 and 4-5 are used, so one of the two cables should work. > > > (probably the straight through cable) > > ok > > > > > > On your zaptel, you should use the phone company as the source for > > > asterisk's internal clock, like: > > why 1 ? - the documention says that 0 means for the card to take the > > timing from its peer (but now i've tryied 1) > > Point out this broken documentation so it can be fixed. The > /etc/zaptel.conf file says 1 for primary, 2 for secondary and so on. 0 > is for internal timing. Also you may have to power cycle the machine for > that change to take place. i've changed it to 1 - power cycle the machine - but didn't work either
> > > > span=1,1,0,ccs,hdb3,crc4 > > > (But I don't think this would make a difference on the red alarm). Also, > > > try removing crc4 at the end. > > my telco told me that they are using crc4 - also if i remove it - it > > does not make any difference > > > > > > Did you do the following before starting asterisk? > > yep - i did so > > > > > > modprobe -v wct4xxp > > > sleep 2 > > > ztcfg -vv > > > > > > When you do these commands, is there an error? > > > > > > Also, in your /etc/asterisk/zapata, did you specify: signalling=pri_cpe ? > > i have signalling=pri_cpi and euroisdn > > Please check and verify your signaling again. Look specifically at a > potential typo. It should be CPE for "Customer Premises Equipment". i have signalling=pri_cpe - the typo was in the mail > > > i have really already tryied everything (i've also checked the card with > > a loop cable - works / and i've already tested the other peer - is also > > working) - so, what they f... could else be wrong ? > > Chill down a bit. We here to help. sorry for that - but its really driving me crazy that i can't get it working (really tryied everything - there was already someone from our telco here - and a technican who has a digium card already running here in austria - no one seems to know where the failure is) best regards Wolfgang _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
