> -----Original Message----- > From: [EMAIL PROTECTED] [mailto:asterisk-users- > [EMAIL PROTECTED] On Behalf Of Marconi Rivello > Sent: Friday, September 10, 2004 1:47 PM > To: Asterisk > Subject: [Asterisk-Users] Red Alarm > > I made some progress... I was looking for an indication in the system > that the problem was occurring. Well, I found it. When the FXO "blows > up" asterisk gets the following event: > WARNING[213006]: Detected alarm on channel 1: Red Alarm
Yeah, basically a RedAlarm is when the Card doesn't see a dialtone. > So, instead of shutting down asterisk, reloading the module, and > starting asterisk again, I will take a look at the drivers source to > see if I manage to make it self-restart when it detects the Red Alarm. > No, you don't want to do this. Fix the problem so the red alarm doesn't occur. We had the same issue when we were running Promise Array card in there. What hardware are you running? CPU, Motherboard, type of computer, extra PCI cards, is it on it's own IRQ, etc.. Those are where you want to start. - Brent _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
