----- Original Message ----- From: "Steve Prior" <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" <[EMAIL PROTECTED]>
Sent: Saturday, October 30, 2004 11:53 AM
Subject: [Asterisk-Users] confusing info from Digium and asteriskdoc aboutsetup of TDM11B
I received my TDM11B as I assume everyone currently does with the green FXS
module nearest the bracket (slot 1), and the red FXO card in the far slot (slot 4).
After installing the card and the zaptel modules I believe I have the modules
loaded correctly, modprobe wcfxs returns:
Freshmaker version: 71 Freshmaker passed register test Module 0: Installed -- AUTO FXS/DPO Module 1: Not Installed Module 2: Not Installed Module 3: Installed -- AUTO FXO (FCC mode) Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules)
The instructions at: http://www.asteriskdocs.org/modules/tinycontent/content/docbook/current_v1/docs-html_one/vm1.html
tell me that I should use in my /etc/zaptel.conf:
fxoks=1 # Make sure that the FXS(green) module is closest to the bracket...
fxsks=4 # FXO module
defaultzone=us
loadzone=us
But a direct note from Digium gave me the following (which I suspect has 2
instead of 4):
---------------------------------------------------------------------
Hi sir,
ALl the files will be the same as the online one, if you want the
examples needed to make your cards work, append these to the following files
/etc/ZAPTEL.CONF: fxoks=1 fxsks=2
/etc/asterisk/ZAPATA.CONF
signalling=fxo_ks group=1 callerid="Steve" <(555)555-5555> channel=>1
signalling=fxs_ks group=2 callerid=asrecieved channel=>2 ----------------------------------------------------------------------
As in the website docs, ztcfg returns:
/sbin/ztcfg -vv
Zaptel Configuration ======================
Channel map:
Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 04: FXS Kewlstart (Default) (Slaves: 04)
2 channels configured.
Now the website shows the following for /etc/asterisk/zapatel.conf, but shouldn't the second channel be 4 and not 2???
language=en context=default switchtype=national signalling=fxo_ks channel => 1 signalling=fxs_ks channel => 2
Now when I have an analog phone plugged into jack #1 on the back of the card and
I start asterisk I get nothing but steady static over that phone. I would have
expected nothing, or by some miracle a dialtone, but not steady static.
Can anyone help get me started?
Steve
Yes, it should be four unless you care to move the actual module on the card to the second slot.
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
