Here is my current situation:
Pictures of the card I received are at: http://home.geekster.com/asterisk/tdm11B-front.jpg http://home.geekster.com/asterisk/tdm11B-back.jpg
You can see the serial numbers and module positions from there.
The /etc/zaptel.conf file I'm using is at: http://home.geekster.com/asterisk/zaptel.conf
Copies of the simple config files in my /etc/asterisk directory are at: http://home.geekster.com/asterisk/
Power is connected to the Molex connector on the card.
After a power up of my Red Hat 8 system a complete log of the steps I used to load modules and start asterisk are at: http://home.geekster.com/asterisk/log.txt
This system was built from a CVS extract from the Digium server last Thursday.
The result is that if I pick up the analog phone atatched to port 1 I get nothing but static. If I call the phone number attached to the POTS line plugged into port 4, asterisk does not answer the call.
At this point I've blown most of the weekend fighting with this card. I'm pretty frustrated at the moment.
Steve
Jim Van Meggelen wrote:
Did you read ALL of my reply? I gave some examples of all the files you should need to get your dev kit running.
Tell me what happens when you implement the zapata.conf and extensions.conf samples I sent.
Good luck.
Jim
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
