[EMAIL PROTECTED] wrote: > Thanks, I'm hoping the result of the grief I'm going through > will be a > well documented process :-)
We're getting there. :-) > Here is exactly where I'm at: [snip] > ------------------------------------------------- > fxoks=1 # FXS(green) module in slot 1 > fxsks=4 # FXO (red) module in slot 4 > defaultzone=us > loadzone=us > -------------------------------------------------- Good so far. > # modprobe zaptel > # modprobe wcfxs > displays on console: > Freshmaker version: 71 > Freshmaker passed register test > Module 0: Installed -- AUTO FXS/DPO > Module 1: Not Installed > Module 2: Not Installed > Module 3: Installed -- AUTO FXO (FCC mode) > Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules) PERECT! > # cat /proc/interrupts > 10: 38451 XT-PIC wctdm Good. It's got its own interrupt (not critical to get it working, but good for performance). > # /sbin/ztcfg -vv > Zaptel Configuration > Channel 01: FXO Kewlstart (Default) (Slaves: 01) > Channel 04: FXS Kewlstart (Default) (Slaves: 04) > 2 channels configured. Flawless. > Is this completely correct so far? It's been suggested that > I might need "modprobe wcfxo" also, but if I do that I get: That's only if you have an X100P > # modprobe wcfxo Not required. > Is this a problem? Nope. > > Also, at exactly what point should I get a dialtone on the > analog phone connected to the FXS (green) module? You won't get dialtone until Asterisk is running. Did you read ALL of my reply? I gave some examples of all the files you should need to get your dev kit running. Tell me what happens when you implement the zapata.conf and extensions.conf samples I sent. Good luck. Jim _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
