Yeah, proper crossover cable. I've eliminated all cabling issues with the T1 analyzer. I get a full and accurate pattern back when I test from the cable end where it would have been connected into the T100P, with the channel bank in loopback. The main symptom is that when I hook the analyzer directly to either the channel bank or the T100P, neither is providing clock. I could have the channel bank supply one, but I will have fax/modem calls bridged between the two PCI cards, so a common clock is best. The most disturbing thing is that the T100P, as the only card in a system, provided clock just fine.
There was a thread last month in -dev about being unable to use common clock source across cards. Is this related? How can one cause zaptel to provide ref clock? Should I be seeing 1000 interrupts/sec on any and all TDM cards? On Fri, 03 Dec 2004 23:59:22 -0500, [email protected] wrote: > The cable should be cross-connect 1-4, 2-5 each way. Is it? _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
