----- Original Message -----
Sent: Monday, January 17, 2005 6:12
PM
Subject: [Asterisk-Users] transfers with
zap channel
Ok, I've seen discussion before on doing
transfers (attended and unattended), there seems to be much confusion over
it.
As things sit, I've been trying (unsuccessfully)
to do transfers with a zap channel (analog phone attached to TDM400). I
have no idea what I'm missing. My current understanding is that I need
to have transfer=yes in zapata.conf, do a flash hook, dial the 2nd number,
flash hook again and we're linked (attended). Then if I hang up
the call will be transfered.
However, when I try to do this things don't
work. Here's what I do:
- connection is made between Zap/3 (analog phone)
and Zap/1 (outside line).
- flash hook to get dialtone (I do get
dialtone)
- attempt to transfer to extension 7007 - I dial
7007
- after dialing the 2nd zero, and before dialing
the 2nd seven, I hear Asterisk announce (seven - zero - one) and then Zap/3 is
hung up (I get a busy signal). Zap/1 gets parked.
Here's what the log shows:
-- Zap/1-1 answered
Zap/3-1
-- Attempting native bridge of Zap/3-1 and
Zap/1-1
-- Started three way call on channel
1
-- Started music on hold, class 'default', on
Zap/3-1
-- Attempting native bridge of Zap/3-1 and
Zap/1-1
-- Starting simple switch on
'Zap/1-2'
-- Started music on hold, class 'default', on
Zap/3-1
== Parked Zap/3-1 on 701. Will timeout back to
dostuff,7001,1 in 45 seconds
-- Added extension '701'
priority 1 to parkedcalls
-- Playing 'digits/7'
(language 'en')
-- Hungup 'Zap/1-1'
== Spawn
extension (dostuff, 7001, 1) exited non-zero on
'Parked/Zap/3-1<ZOMBIE>'
-- Stopped music on hold
on Parked/Zap/3-1<ZOMBIE>
-- Playing 'digits/0'
(language 'en')
-- Playing 'digits/1' (language
'en')
-- Parking call to 'Zap/1-2'
-- Hungup 'Zap/1-2'
-- Stopped music on hold on
Zap/3-1
== Zap/3-1 got tired of being parked
-- Hungup 'Zap/3-1'
I'm not sure what I'm missing. Apparently
something to do with parked calls, so I must be misunderstanding how do to the
call transfer.
I've also tried enabling Asterisk transfer on the
channel (exten => 7010,1,Dial(${CORDLESS},20,tT)).
My understanding of this method is that this
allows one to hit the pound (#) to start a transfer. Yet pound does
nothing. Is it fair to assume that the tT only works on SIP channels, or
am I missing something else.
Any help is much appreciated....
Paul
_______________________________________________
Asterisk-Users
mailing
list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To
UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
