I'll preface this by saying that I have looked in the wiki, read through the samples, and attempted to call Digium (they're closed.) So I'm praying that someone on the list can help me out!
I have two Digium cards. One is a TE405P quad T1 card. The other is a TDM40B (I believe) quad analog POTS card.
Some background:
We have two T1's. Both of them are split in half (half voice, half data. - Don't ask me, that's how I inherited them.) Voice traffic flows on the back 12 channels of the T's.
Our provider has been telling us that they are only seeing one D channel active. This would make sense if somehow only the first T1 in the 405P was activated.
Here is a sample of our zaptel.conf config as it was handed to me (I inherited this Asterisk project, btw). These configs are likely a train wreck, so if anybody could possible either generate a config that would work, or explain a somewhat laymens terms how I can go about making a good config, I'd appreciate it.
zaptel.conf:
span=1,0,0,esf,b8zs span=2,0,0,esf,b8zs
fxoks=1-24 bchan=12-23,36-47 dchan=24,48
loadzone = us
fxsks=49-53
and zapata.conf:
context=from-pstn signalling=pri_cpe switchtype=national faxdetect=incoming usecallerid=yes echocancel=yes echocancelwhenbridged=no echotraining=400 group=0 channel=12-23,36-47
context=from-pstn signalling=fxs_ks faxdetect=incoming usecallerid=yes echocancel=yes echocancelwhenbridged=no echotraining=800 group=1 channel=49-53
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
