Brian Watters wrote:
Ok .. It appears we have outbound calls working well via our SIP trunk and BroadVoice .. However inbound just plain does not work, What happens is when you call our BroadVoice number it tells you the person you are calling is not available .. Never makes it to our Asterisk? .. Any ideas where to look and or what to tweak?
If the incoming SIP connection really isn't making it to your Asterisk (verify with 'sip debug' command on console), it is likely because BV doesn't know where to connect to.
* accomplishes this by a process called "registration." In your sip.conf, near the top in the [general] section, you should have a line that starts out:
register =>
If this is there, can you send it (and change the password to something innocuous?)
If this line is there, you can see whether it succeeded by typing 'sip show registry' at the console.
If that shows the state of registered, and your sip debug output shows an in coming connection request from BV, then there are further steps for debugging, but start with the above.
-Johnathan _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
