Zoltan,
These settings are in features.conf: [featuremap] ;blindxfer => ## ; Blind Transfer ;disconnect => ** ; Disconnect Call automon => *1 ; One Touch Record ;atxfer => *2 ; Attended Xfer Uncomment the blindxfer or atxfer lines and set the code to whatever it is you'd like. Cheers, Alex ___________________________________________ Alex Robar, Technical Support, GearyTech Inc. 3075 Fourteenth Avenue, Unit 3, Markham, Ontario L3R 0G9 Markham: 905-513-8000 x 223 Fax: 905-513-8040 Toronto: 416-226-3614 Toll Free: 888-890-3499 [EMAIL PROTECTED] www.gearytech.com Strategic management of technology for business. ________________________________ From: Pittner, Zoltan [mailto:[EMAIL PROTECTED] Sent: Wednesday, September 20, 2006 5:46 PM To: asterisk Subject: [on-asterisk] Change call transfer settings Would it be possible to change the call transfer from # to let's say ##? I'll tell you where the problem is. My "Asterisk Dial command options" are set to Trt to allow call transfer. Also the Outbound Dial Command options are set to: rt. However I would like Trt here too, so I can transfer a calls I made if I need to. The problem is, that many other systems are set to "If you know your party's extension number press the # key now!" If I press # I can hear my own system trying to transfer me. So, If I could set the transfer to ## instead of # I think that would solve these problems. Or would it? Your help is much appreciated. Zoltan.
