You should be able to change the Mediatrix configuration to point to your asterisk box instead of to your VoIP provider, unless it's locked by your provider somehow.
- Ian On 10/4/06, Anthony Boyington <[EMAIL PROTECTED]> wrote:
Ok thank you, now how do I connect the Mediatrix to my asterisk, after I make the mgcp.conf changes. right now the Mediatrix sits directly between the modem and my router then my asterisk box is connected to the router along with the other computers. modem >> Mediatrix >> router >> ....... On 10/4/06, Ian Service <[EMAIL PROTECTED]> wrote: > > Last time I looked into this was almost two years ago and at that time > asterisk could not be used as an MGCP client. It will allow you to connect > your MGCP hardware to asterisk (which I've done and works well). > > http://www.voip-info.org/wiki/index.php?page=Asterisk+MGCP+channels > > - Ian > > On 10/4/06, Anthony Boyington < [EMAIL PROTECTED]> wrote: > > > > My VOIP provider uses MGCP not SIP. I was given a * Mediatrix 2102* - 2-port VoIP Access Devices to which I have a cordless phone attached to. > > This works fine and I have a North American package plan setup. > > is it possible to configure my Trixbox to use MGCP truck from my > > provider just as if I was using a SIP trunk. So that all my calls would be > > routed through my Trixbox instead of the Mediatrix 2102 > > > -- Anthony Boyington Director 416 Solutions Office: 416-850-2603 Toll free: 877-318-6489 Mobile: 905-464-9710 www.416solutions.com www.unitz.ca CONFIDENTIALITY NOTE: The information outlined in this Email is legally privileged and confidential information intended only for the use of the individual or entity named above. If you have received this email in error, please notify our office immediately. If you are not the intended recipient, you are hereby notified that any use, dissemination, distribution or copy of this email or any attachments is strictly prohibited.
