My apologies I overlooked that. I guess until they implement SIP I will stick to my current setup. Thank you for the help
On 10/5/06, Ian Service <[EMAIL PROTECTED]> wrote:
Like I said in my first message, you can't do that with asterisk. asterisk cannot be an mgcp client, only an mgcp server. - Ian On 10/4/06, Anthony Boyington <[EMAIL PROTECTED]> wrote: > > saying that I can get my Mediatrix pointing to my asterisk instead of my > VOIP provider. How do I get my MGCP VOIP provider to my asterisk box which > is my first goal. > > On 10/4/06, Ian Service < [EMAIL PROTECTED]> wrote: > > > > You should be able to change the Mediatrix configuration to point to > > your asterisk box instead of to your VoIP provider, unless it's locked by > > your provider somehow. > > > > - Ian > > > > On 10/4/06, Anthony Boyington <[EMAIL PROTECTED]> wrote: > > > > > > Ok thank you, now how do I connect the Mediatrix to my asterisk, > > > after I make the mgcp.conf changes. right now the Mediatrix sits > > > directly between the modem and my router then my asterisk box is > > > connected to the router along with the other computers. > > > > > > modem >> Mediatrix >> router >> ....... > > > > > > On 10/4/06, Ian Service < [EMAIL PROTECTED]> wrote: > > > > > > > > Last time I looked into this was almost two years ago and at that > > > > time asterisk could not be used as an MGCP client. It will allow you to > > > > connect your MGCP hardware to asterisk (which I've done and works well). > > > > > > > > > > > > http://www.voip-info.org/wiki/index.php?page=Asterisk+MGCP+channels > > > > > > > > - Ian > > > > > > > > On 10/4/06, Anthony Boyington < [EMAIL PROTECTED]> wrote: > > > > > > > > > > My VOIP provider uses MGCP not SIP. I was given a * Mediatrix > > > > > 2102* - 2-port VoIP Access Devices to which I have a cordless > > > > > phone attached to. This works fine and I have a North American package plan > > > > > setup. > > > > > is it possible to configure my Trixbox to use MGCP truck from my > > > > > provider just as if I was using a SIP trunk. So that all my calls would be > > > > > routed through my Trixbox instead of the Mediatrix 2102 > > > > > > > > > > > > > > > > > > > > >
