Hi,
 
I think I have finally figured out the direct or indirect cause of the
problem.
I was using trixbox 1.2 and later upgraded to 2.0 - latest and greatest.
The problem can be reproduced in both.
 
I have a Aastra 480i CT but I don't think its phone related.  And here
is my observations.
When I talk loud consistently for 5-10 seconds, the call will be
dropped.  For a test, I shouted into the phone for 5-10 second, the call
would for sure be dropped.  If I talk softly in lower volume, the call
will last.
I think Asterisk is dropping it when talk vol is exceeded certain limit
and the problem is not related to the phone.
 
Any suggestion will be appreciated.
 
Thanks,
Richard
 
-----Original Message-----
From: Richard (Rogers @ work) [mailto:[EMAIL PROTECTED] 
Sent: Thursday, March 15, 2007 10:25 AM
To: Michael Zhang; Aloysius Thevarajah Lloyd
Cc: [email protected]
Subject: Re: [on-asterisk] Debugging drop call problem
 
Hi Micheal,
 
You are correct.  The problem has not occurred yet.  Good to know that
the 401 can be ignored.
Will post it again when it occurs.
 
Thanks,
Richard
----- Original Message ----- 
From: Michael Zhang <mailto:[EMAIL PROTECTED]>  
To: Richard (Rogers @ <mailto:[EMAIL PROTECTED]>  work) ; Aloysius
Thevarajah Lloyd <mailto:[EMAIL PROTECTED]>  
Cc: [email protected] 
Sent: Thursday, March 15, 2007 10:22 AM
Subject: RE: [on-asterisk] Debugging drop call problem
 
It seems you did not provide sufficient traces for the problem you
described. The "401" error is a normal challenge for "Register"
authentication. You might need to keep your Ethereal or whatever
sniffing tool open until the problem happens again.
 
Cheers,
Michael
 

  _____  

From: Richard (Rogers @ work) [mailto:[EMAIL PROTECTED] 
Sent: Thursday, March 15, 2007 7:34 AM
To: 'Aloysius Thevarajah Lloyd'
Cc: [email protected]
Subject: RE: [on-asterisk] Debugging drop call problem
>From the log, I see some 401 errors.  I wonder if this would mean and if
it would be the one to blame?
But 3 lines below it, the status was OK with 1 bind?
 
Any suggestion is appreciated.
 
3470.289876 192.168.0.111 -> 192.168.0.222 SIP Status: 100 Trying    (1
bindings)
3470.289951 192.168.0.111 -> 192.168.0.222 SIP Status: 401 Unauthorized
(0 bindings)
3470.360641 192.168.0.222 -> 192.168.0.111 SIP Request: REGISTER
sip:192.168.0.111:5060
3470.360838 192.168.0.111 -> 192.168.0.222 SIP Status: 100 Trying    (1
bindings)
3470.364668 192.168.0.111 -> 192.168.0.222 SIP Status: 200 OK    (1
bindings)
3474.370689 192.168.0.111 -> 192.168.0.222 SIP Request: NOTIFY
sip:[EMAIL PROTECTED]
3474.438354 192.168.0.222 -> 192.168.0.111 SIP Status: 200 OK
3483.629054 192.168.0.111 -> 192.168.0.222 SIP Request: OPTIONS
sip:[EMAIL PROTECTED]
3483.686565 192.168.0.222 -> 192.168.0.111 SIP Status: 200 OK
 
Thanks,
Richard
 
-----Original Message-----
From: Aloysius Thevarajah Lloyd [mailto:[EMAIL PROTECTED] 
Sent: Tuesday, March 13, 2007 9:23 PM
To: Richard (Rogers @ work)
Cc: [email protected]
Subject: Re: [on-asterisk] Debugging drop call problem
 
Use
 
tethereal -l -n udp port 5060 >sip.log
 
capture the sip messages.
 
U will see who is sending the BYE.
 
Thanks
Lloyd

 
On 3/13/07, Richard (Rogers @ work) <[EMAIL PROTECTED]> wrote: 
Hi,

Occasionally, some calls get dropped for no obvious reasons.
What is the best way to track it down? 
Is there a way to log all call-terminations and the reasons associated
with them?

Thanks,
Richard




---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
 

Reply via email to