Is there any other place than sip.conf and any other settings other than externip=x.x.x.x that would effect the sip packet? I can clearly see that sip packets ignore the externip variable and send the local ip of 10.x.x.x over. Any other Guru has experience with this? Thanks
> From: [email protected] > To: [email protected] > CC: [email protected] > Date: Mon, 1 Mar 2010 11:50:13 -0500 > Subject: RE: [on-asterisk] externip problem > > > :-) What I was trying to relay is that this is an amazon instance and they > have their own firewall tool and other wise there is not firewall on this > system. IPTABLES is also disabled. Even if with system-config-securitylevel > installed the tool won't run since it's using amazon network tools. > > > Date: Mon, 1 Mar 2010 11:50:26 -0500 > > From: [email protected] > > To: [email protected] > > CC: [email protected] > > Subject: Re: [on-asterisk] externip problem > > > > yum install system-config-securitylevel :) > > > > Bruce N wrote: > > > Thanks for the input. IPTABLES is not running as it shows in service > > > iptables status. > > > system-config-sercuritylevel is unknown command on this CentOS install. > > > > > > -Bruce > > > > > > > Date: Mon, 1 Mar 2010 11:43:43 -0500 > > > > From: [email protected] > > > > To: [email protected] > > > > CC: [email protected] > > > > Subject: Re: [on-asterisk] externip problem > > > > > > > > Hey Bruce if its on a static ip already you should be good to role (bar > > > > local issues with your external clients fw/routers) > > > > > > > > One thing that is usually a stumper for most people is that operating > > > > system like cantos 5 come with firewall rules already turned on by > > > > default , Id start there, you can use system-config-securitylevel to > > > set > > > > that to off. > > > > > > > > Phil. > > > > > > > > > > > > Bruce N wrote: > > > > > Hi guys, > > > > > I have tried setup externip=public ip of asterisk server and > > > nat=yes in sip.conf but when I do a sip debug I see that packets are > > > sent with private ip of 10.x.x.x which get a deny of service. > > > > > What exact settings have to be set for a server behind nat? It is > > > an Amazon server and not even behind NAT. Has static IP from amazon > > > and firewall rules allow 5060 tcp/udp and 10000-20000 udp. > > > > > ThanksBruce > > > > > _________________________________________________________________ > > > > > Introducing Windows® phone. > > > > > http://go.microsoft.com/?linkid=9708122 > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > To unsubscribe, e-mail: [email protected] > > > > For additional commands, e-mail: [email protected] > > > > > > > > > > ------------------------------------------------------------------------ > > > Windows® phone-your Windows stuff, on the go. See more. > > > <http://go.microsoft.com/?linkid=9708119> > > > > _________________________________________________________________ > _________________________________________________________________ Introducing Windows® phone. http://go.microsoft.com/?linkid=9708122
