Yes although you will need a good line of Site/Fresnel, depending on
whats between the two sites noise wise you may opt for a different
frequency radios to ensure you have good success.
If you've not done alot of wireless deploys, its probably worth pony'ing
up for a survery to ensure you have a workable line of site. (physical
vs Fresnel is not the same thing)
http://www.ubnt.com if you want to browse there gear (1.4gigbit radios
aka airfibre, comming too), there are a couple canadian wisps heavily
using there gear which you can always lean on for quick answers.
Regards,
Phil.
On 05/30/2012 09:27 PM, James Knott wrote:
Philip Mullis wrote:
roughly running you 150 per end
Will that work reliably over that sort of distance. Another brand
I've work with is Ceragon, but IIRC, the requirements are a bit beyond
the gear I've worked with.
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
