Hi All I stopped for a while and read the Archives (well some of it) Amazing what you can learn if you stop to read long enough ;)
I have been using Asterisk for 2 1/2 years now in a std PC Initially with a X100p and TDM400p (with FXS module) [The original Development Kit] I have always had an echo problem , or poor voice quality I have 3 snom 200 connected using SIP and an SIP VoIP Provider I accept calls on the X100p and based on routing bridge the call to an analog phone on the TDM or to IP Phones I recently got 2 FXO Modules, removed the X100p and now have the TDM400p with (FXS, spare , FXO , FXO) Still I have quality issues. I have tried working with ztmonitor and changing the rxgain and txgain as well as echotraining and echocancel yes , 125 300 900 Nothing results in good quality. (1) What do most people have as settings for rxgain, txgain etc.. to control poor audio quality ? (2) What could be wrong in my case where else can I look The call has have a hiss, echo or worst sounds like you are 100 feet underwater talking through your hands it's muffled, not just low volume but mumblely no clear sound. Going to be trying a Net2801 and Soekris board as soon as they arrive, also getting a Clipcomm CG 410, just waiting for delivery Any Ideas ? Thanks All Barry _______________________________________________ Astlinux-users mailing list [email protected] http://lists.kriscompanies.com/mailman/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
