Hi Erick
cat /proc/interrupts
CPU0
0: 72838149 XT-PIC timer
1: 1602 XT-PIC i8042
2: 0 XT-PIC cascade
5: 1642820 XT-PIC ehci_hcd, eth0
7: 7 XT-PIC parport0
9: 0 XT-PIC acpi
11: 72373651 XT-PIC uhci_hcd, uhci_hcd, uhci_hcd, VIA8233,
wctdm
12: 66 XT-PIC i8042
14: 355041 XT-PIC ide0
15: 13 XT-PIC ide1
NMI: 0
LOC: 0
ERR: 0
MIS: 0
uname -r
2.6.10-gentoo-r6
As requested, all help greatly appreciated
Thanks
Barry
Erick Perez wrote:
> please post the output of the command
> cat /proc/interrupts
> and
> uname -r
> the hiss may be from interrupt sharing with the TDM card.
> try turning off any service in the motherboard that you dont need
> (serials, usb,audio,etc)
> unload the x100p module, make sure you're not using ztdummy
>
> that's from the top of my head......
>
>
> On 9/29/06, Barry Fawthrop <[EMAIL PROTECTED]> wrote:
>
>> Hi All
>>
>> I stopped for a while and read the Archives (well some of it) Amazing
>> what you can learn if you stop to read long enough ;)
>>
>> I have been using Asterisk for 2 1/2 years now in a std PC Initially
>> with a X100p and TDM400p (with FXS module) [The original Development Kit]
>>
>> I have always had an echo problem , or poor voice quality
>> I have 3 snom 200 connected using SIP and an SIP VoIP Provider
>> I accept calls on the X100p and based on routing bridge the call to an
>> analog phone on the TDM or to IP Phones
>>
>> I recently got 2 FXO Modules, removed the X100p and now have the TDM400p
>> with (FXS, spare , FXO , FXO) Still I have quality issues.
>>
>> I have tried working with ztmonitor and changing the rxgain and txgain
>> as well as echotraining and echocancel yes , 125 300 900
>> Nothing results in good quality.
>>
>> (1) What do most people have as settings for rxgain, txgain etc.. to
>> control poor audio quality ?
>> (2) What could be wrong in my case where else can I look
>>
>>
>> The call has have a hiss, echo or worst sounds like you are 100 feet
>> underwater talking through your hands it's muffled, not just low volume
>> but mumblely
>> no clear sound.
>>
>> Going to be trying a Net2801 and Soekris board as soon as they arrive,
>> also getting a Clipcomm CG 410, just waiting for delivery
>>
>> Any Ideas ?
>>
>> Thanks All
>>
>> Barry
>> _______________________________________________
>> Astlinux-users mailing list
>> [email protected]
>> http://lists.kriscompanies.com/mailman/listinfo/astlinux-users
>>
>> Donations to support AstLinux are graciously accepted via PayPal to [EMAIL
>> PROTECTED]
>>
>>
>
>
>
_______________________________________________
Astlinux-users mailing list
[email protected]
http://lists.kriscompanies.com/mailman/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to [EMAIL
PROTECTED]
