I have a 0.4.4 server running on a 1.2Mhz processor with 320M of ram and a
IDE CF card. This is the second machine I have tried. The prior machine
was a 400Mhz with 512M of RAM on a Western Digital HardDrive. Same config.
I have had this problem since 0.4.1. Both machines had the same TDM400 with
one FXO module installed.
The machine will sporadically go into a high utilization. I state this
because of the following:
1. No ports are available
2. SIP & IAX are not available (probably due to number 1)
3. If you call in via the FXO, you get a stuttered message of the following:
(climbing tones) We're sorry but the number you dialed was not
recognized, please check the number including the area code and try your
call again.
4. The console screen is blank and does not respond.
How do I troubleshoot this? I assume that the code is running to give me
the message in number 3 but I get the message stuttered because the CPU
utilization is high (assumption).
My only recourse is to reboot the box.
_______________________________________________
Astlinux-users mailing list
[email protected]
http://lists.kriscompanies.com/mailman/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to [EMAIL
PROTECTED]
