On Mar 5, 2008, at 5:49 PM, John Novack wrote: > Darrick Hartman wrote: >> >> Since you're still having issues, I would strongly recommend starting >> from scratch. Remove everything off the CF, dd the runnix.img >> file from here [1] to your CF, > Interestingly, a 256Mb Kodak brand CF card, clean, returns the error > from dd of no space left on drive, yet the partition table appears OK > with ( from memory ) 129 M VFAT and 128 M free space.
This is just fine John, the runnix.img.gz is based off a 1G CF card, but only the first 128M matter, so CF cards less than 1G will show this error, no problem. > Created the partition and things looked better > > I read in other postings that the partition need not be formatted. > Correct?? After you created hda2 with fdisk, then rebooted, then "genunion /dev/ hda2" creates the filesystem for you. >> >> Follow the steps typing 'yes' where appropriate. It will tell you >> how >> to modify the XXX.run.conf file. Do that, then reboot. >> > Modified file - > pbx os # cat astlinux-trunk-1615.run.conf > # Kernel command line > KCMD="root=/dev/ram0 rw init=/linuxrc astlinux=geni586 > astimg=astlinux-trunk-1615.run astrw=/dev/hda2 astlive ide=nodma" This is a problem, it should read "asturw=/dev/hda2" Please try again. Lonnie ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Astlinux-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
