On Mar 4, 2008, at 8:03 PM, John Novack wrote: > Lonnie Abelbeck wrote: >> >>> If you want, you can log into the 1586 setup via SSH at: >>> bigjohnnovack.dyndns.org and have a look around >>> >> >> I tried logging in, but failed, your firewall might be in the way. >> > No firewall. Router is port forwarding 443 and 22 to the > troublesome box. > You should have access to both SSH and https > > Can't get to either?
No, sorry. > Still get the error message: mounting /dev/loop1 on /mnt/asturw > failed invalid argument >> also >> >> $ cat /proc/cmdline >> > After a reboot: > > pbx ~ # cat /proc/cmdline > root=/dev/ram0 rw init=/linuxrc astlinux=geni586 astimg=astlinux- > trunk-1586.run asturw=/dev/hda2 astlive ide=nodma > pbx ~ # I will have to pass to Darrick, but it appears as if in /trunk/target/initrd/target_skeleton/linuxrc $ASTURW is set to /dev/loop1 instead of /dev/hda2 and that is the source of all the problems, and somehow a geni586 build triggers this. But, I have no clue why this would be... unless there was a problem with the build. I'm stumped. Lonnie ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Astlinux-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
