Hi, I successfully installed Astlinux 0.6.2 on a compact flash and the machine is booting up nicely with a Sangoma A200 card installed (with HWEC and 4x FXO ports).
I then submit the wanrouter hwprobe command to make sure the system can detect my Sangoma card and it does : pbx ~ # wanrouter hwprobe ------------------------------- | Wanpipe Hardware Probe Info | ------------------------------- 1 . AFT-A200-SH : SLOT=0 : BUS=4 : IRQ=9 : CPU=A : PORT=PRI : HWEC=32 : V=11 Card Cnt: A200=1 My next step is to issue the wancfg command, but the system always complain about a missing device w1g1 pbx ~ # wancfg Sangoma AFT Series card update flash software (version 1.9) Get index: w1g1: No such device w1g1: Failed to create connection The information on the website is very simple, I should just issue the wancfg command from a SSH terminal session (not the console). What Am I missing? Thanks. -- ** Stephan Monette Unlimitel Inc. Tel.: 613-688-6212, x221 Fax.: 613-482-1077 ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
