On Mar 23, 2009, at 7:50 AM, Iwan wrote: > Dear, > > I was looking for a not too expensive solution to make my doorbell > asterisk compatible. > This means that the actions are as follows: > > - Someone presses the doorbell > - The doorbell is dialing towards the Asterisk server > - The Asterisk server will execute a action based on the dialplan > (send SMS, create voicemail, transfer call to your mobile) > > Now after doing some googeling I found this tread: > http://www.mail-archive.com/astlinux-users@lists.sourceforge.net/msg00794.html > > I am wondering if anyone builded and tested this exept for Lonnie? > And is this also possible to do with a direct RJ-45 connector and > not having to go trough an ATA?
No, an ATA is required. Status Report: The project is working well for me, without any further tweaking, more than a year later. > Thanks for the help so far ... > > I-1 Lonnie ------------------------------------------------------------------------------ Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
