Hi, I want to buy and install Skype for Asterisk, but before to try I just want to be shure I use the right procedure. I have Astlinux 0.7.2 installed:
Filesystem Size Used Available Use% Mounted on /dev/hda1 127.7M 33.9M 93.8M 27% /oldroot/cdrom /dev/hda2 1.8G 44.5M 1.6G 3% /oldroot/mnt/asturw I figured out that files in /root disappear after a reboot and I dont want to have the same with a bought license.. ;-) What should I do to ?adapt? the standard installation instructions to use on Astlinux? Thanks, Maarten The procedure to install Skype for Asterisk (from digium) is as follows: ===[ Installation Instructions for Source-based Asterisk ]===================== 1) Download the 'register' tool to generate a valid license from: http://downloads.digium.com/pub/register/linux/register As an example, logged in as root: cd ~ wget http://downloads.digium.com/pub/register/linux/register 2) Make the downloaded file executable by running: chmod 500 ~/register 3) Run the register tool and follow the interactive instructions. Internet access is required from your Asterisk server in order to register your Skype For Asterisk key for use. Outgoing network traffic to TCP port 443 (SSL) must be allowed in order for the register utility to successfully communicate with Digium's license server and complete the registration process. The registration utility will prompt you for your Skype For Asterisk license key. As an exmple: ~/register 4) Download Skype For Asterisk from: http://downloads.digium.com/pub/telephony/skypeforasterisk Navigate the subdirectories choosing the versions that match the version of Asterisk already installed on the target machine and the architecture of the Linux distribution that is installed. 5) Extract and install Skype For Asterisk. For example, if the file downloaded is for a 32-bit install on Asterisk 1.4 and the version of Skype For Asterisk is 0.9.12, the commands for installation (as root) would be: tar -xvzf skypeforasterisk-1.4_0.9.12-x86_32.tar.gz cd skypeforasterisk-1.4_0.9.12/ make make install make samples 6) Asterisk must be restarted in order to load your new Skype for Asterisk licensed channels. asterisk -rx "restart when convenient" Notes: - Asterisk will automatically restart once there are no active calls. 7) Verify that Skype For Asterisk is loaded and properly licensed by running the Asterisk CLI command: ===[ Backup Instructions ]===================================================== ** It is VERY IMPORTANT to backup the license(s) generated by your system. The /var/lib/asterisk/licenses directory contains the Host-ID specific license files for your system. These license files are tied to the MAC address of all the ethernet devices installed in your system. Creating a backup of this directory will allow you to restore your Skype For Asterisk license file in case you need to reinstall your operating system. This will help prevent you from needing to contact Digium to request authorization to increment your Skype For Asterisk key and from needing to purchase a new Skype For Asterisk key if you exceed the maximum number of Skype For Asterisk key increments allowed. skype show licenses
------------------------------------------------------------------------------ This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev
_______________________________________________ Astlinux-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [email protected].
