Tom,

> One more quick question... can you remind me how to configure a bridge 
> interface. My 4801 has (5) interfaces and I want to bridge eth1 - eth4 for my 
> LAN interface. I added BRIDGE0="eth1 eth2 eth3 eth4" to rc.conf (via the 
> "Edit" tab), but after rebooting, I don't see a br0 interface to assign to my 
> 1st LAN interface. Any suggestions would be appreciated.

You need to add:

BRIDGE0="eth1 eth2 eth3 eth4"

to your /mnt/kd/rc.conf.d/user.conf file via the Network tab...

<<inline: user.conf.jpg>>


then after a reboot you will have a "br0" interface.

Lonnie



On Aug 24, 2012, at 10:01 AM, Tom Mazzotta wrote:

> Lonnie,
> 
> I downloaded a "fresh" copy of the 4801 image from the main astlinux website 
> and flashed a different CF card. The setup process seemed to go fine this 
> time around. I can confirm that the default reboot delay is not long enough 
> because the webpage to the box times out before the 4801 reboots, but this is 
> a very minor issue.
> 
> One more quick question... can you remind me how to configure a bridge 
> interface. My 4801 has (5) interfaces and I want to bridge eth1 - eth4 for my 
> LAN interface. I added BRIDGE0="eth1 eth2 eth3 eth4" to rc.conf (via the 
> "Edit" tab), but after rebooting, I don't see a br0 interface to assign to my 
> 1st LAN interface. Any suggestions would be appreciated.
> 
> tm
> 
> -----Original Message-----
> From: Tom Mazzotta [mailto:[email protected]] 
> Sent: Friday, August 24, 2012 7:49 AM
> To: AstLinux Users Mailing List
> Subject: Re: [Astlinux-users] Problem w/ new build for Net 4801
> 
> Thanks Lonnie, I'll give it a try.
> 
> -----Original Message-----
> From: Lonnie Abelbeck [mailto:[email protected]]
> Sent: Friday, August 24, 2012 12:14 AM
> To: AstLinux Users Mailing List
> Subject: Re: [Astlinux-users] Problem w/ new build for Net 4801
> 
> Hi Tom,
> 
> I dug out my old 128MB net4801, burned the same 
> "astlinux-1.0.4-asterisk-1.8.14.1.img.gz" to a 2GB SanDisk Ultra II .
> 
> Using eth0 I was able to browse to https://pbx.local on the same switch and 
> performed the setup via https://pbx.local/admin/setup.php
> 
> Everything worked fine.  The only minor hiccup was during the first reboot 
> the countdown timer ended and the browser page went blank, the reboot was not 
> yet complete because the SSH keys took longer than normal to generate.  I 
> waited 30 seconds and did a reload of the browser and 
> https://pbx.local/admin/setup.php was ready for Step 2 to configure the 
> unionfs partition as normal.
> 
> Other than that, everything went smooth, albeit painfully slow on the 128MB 
> net4801 :-) .  I was able to change the system password, add asterisk sounds, 
> and make a demo call to Digium.
> 
> Possibly you have a bad ethernet port, you might try again, monitoring the 
> console port during the process for clues.  If your eth0 is bad or 
> intermittent, you will have to do the initial setup via the console port, 
> instructions are under "Persistent Storage Options (CLI)" at 
> http://doc.astlinux.org/userdoc:new-install .
> 
> Lonnie
> 
> 
> On Aug 23, 2012, at 7:59 PM, Tom Mazzotta wrote:
> 
>> I'm in the process of building a new astlinux box for internal testing 
>> purposes using an old Net 4801. I downloaded the "Soekris net4801" image for 
>> 1.0.4-Asterisk-1.8.14.1 (via the project website, NOT the build page) and 
>> dd'd it to a 4GB CF card. The initial boot of the system seemed to work fine 
>> (as viewed from a console session). I connected the 4801 to my LAN using 
>> eth0 and I brought up the setup page from a browser running on my laptop. 
>> After logging in, I did not change any of the defaults on the Installation 
>> Setup dialog (i.e., Combind Unionfs selected) and I hit continue. After the 
>> box rebooted I was NOT able to reconnect to it via the web browser. When I 
>> logged into the box using a console session, ifconfig shows me that I only 
>> have a loopback interface, i.e. there is no eth0. I still have link and 
>> activity lights on the port, but even after forcing a reboot from the 
>> console, I can't connect via Ethernet.
>> 
>> Any suggestions?
> 
> 
> ------------------------------------------------------------------------------
> Live Security Virtual Conference
> Exclusive live event will cover all the ways today's security and threat 
> landscape has changed and how IT managers can respond. Discussions will 
> include endpoint security, mobile security and the latest in malware threats. 
> http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
> _______________________________________________
> Astlinux-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/astlinux-users
> 
> Donations to support AstLinux are graciously accepted via PayPal to 
> [email protected].
> 
> 
> ------------------------------------------------------------------------------
> Live Security Virtual Conference
> Exclusive live event will cover all the ways today's security and threat 
> landscape has changed and how IT managers can respond. Discussions will 
> include endpoint security, mobile security and the latest in malware threats. 
> http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
> _______________________________________________
> Astlinux-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/astlinux-users
> 
> Donations to support AstLinux are graciously accepted via PayPal to 
> [email protected].
> 
> 
> ------------------------------------------------------------------------------
> Live Security Virtual Conference
> Exclusive live event will cover all the ways today's security and 
> threat landscape has changed and how IT managers can respond. Discussions 
> will include endpoint security, mobile security and the latest in malware 
> threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
> _______________________________________________
> Astlinux-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/astlinux-users
> 
> Donations to support AstLinux are graciously accepted via PayPal to 
> [email protected].
> 
> 

------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and 
threat landscape has changed and how IT managers can respond. Discussions 
will include endpoint security, mobile security and the latest in malware 
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
Astlinux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/astlinux-users

Donations to support AstLinux are graciously accepted via PayPal to 
[email protected].

Reply via email to