Hi,

I've been having problems configuring DAHDI for a TDM410 card with 1 FXO 
module. 
The card was sourced from the auction site so could be a clone if that matters.
I'm not sure about the span=... stuff in the astlinux documentation - if it's 
for the POTS cards or not so have left it out of the configuration.
In the asterisk configuration web frontend, under analog trunks I have POTS 1 
and "No FXO ports detected !!"
Could someone help me with this please?

Thank you

Aaron



Information:
lspci shows the card as:                                                        
       

00:08.0 Ethernet controller: Digium, Inc. Wildcard TDM410 4-port analog card 
(rev 11)                                                    

lsmod gives:
Module                  Size  Used by                                           
                                                         
dahdi_voicebus         37303  0                                                 
                                                         
dahdi                 175023  1 dahdi_voicebus                                  
                                                         
padlock_aes             3496  0                                                 
                                                         
aes_generic            25641  1 padlock_aes                                     
                                                         
via_velocity           18428  0                                                 
                                                         
via_rhine              13716  0                                                 
                                                         
8139too                12900  0                                                 
                                                         
mii                     2663  2 via_rhine,8139too                               
                                                         
rtc                     3708  0                                                 
         

dahdi/system.conf:        
fxsks=1
loadzone=uk
defaultzone=uk
echocanceller=mg2,1-4

chan_dahdi.conf:

[trunkgroups]
    
[channels]
    loadzone=uk
    defaultzone=uk
    usecallerid=yes
    ukcallerid=yes
    cidsignalling=v23 ; Added for UK CLI detection
    cidstart=polarity ; Added for UK CLI detection
    sendcalleridafter=1
    callerid=asreceived ; propagate the CID received from BT.
    group=1
    callgroup=1
    pickupgroup=1

    context=from-zaptel
    group=1
    signalling=fxs_ks
    channel = 1
    rxwink=300
    hidecallerid=no
    callwaiting=yes
    usecallingpres=yes
    callwaitingcallerid=yes
    threewaycalling=yes
    transfer=yes
    canpark=yes
    cancallforward=yes
    callreturn=yes
    echocancel=yes
    echocancelwhenbridged=no
    faxdetect=incoming
    ;echotraining=800
    rxgain=4.0
    txgain=4.0

------------------------------------------------------------------------------
LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial
Remotely access PCs and mobile devices and provide instant support
Improve your efficiency, and focus on delivering more value-add services
Discover what IT Professionals Know. Rescue delivers
http://p.sf.net/sfu/logmein_12329d2d
_______________________________________________
Astlinux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/astlinux-users

Donations to support AstLinux are graciously accepted via PayPal to 
[email protected].

Reply via email to