My browser seems to have garbled your configuration, but one point I see wrong is that
the statement "channel=1" HAS to be the last statement in a section.
Everything after that is ignored.
A sample from a unit I set up - this would be in chan_dahdi.conf
This comes after general
context=line1
group=1
txgain =0 ;
rxgain =0
pulsedial=yes
callerid=asreceived
signalling=fxs_ls
accountcode=FXO1
channel => 1
You will also need, in system.conf:
fxsls=1
I haven't used the 410, only the TDM400, but the config should be the same
I don't believe that DAHDI supports the TDM400
beadvised that in the UK, caller id might need some tweaking
UK members on the list might be able to help
Hope this helps
John Novack
;
Aaron Sarginson wrote:
Hi,
I've been having problems configuring DAHDI for a TDM410 card with 1 FXO module.
The card was sourced from the auction site so could be a clone if that matters.
I'm not sure about the span=... stuff in the astlinux documentation - if it's
for the POTS cards or not so have left it out of the configuration.
In the asterisk configuration web frontend, under analog trunks I have POTS 1 and
"*No FXO ports detected !!"*
Could someone help me with this please?
Thank you
*
*
Aaron
Information:
lspci shows the card as:
00:08.0 Ethernet controller: Digium, Inc. Wildcard TDM410 4-port analog card
(rev 11)
lsmod gives:
Module Size Used by
dahdi_voicebus 37303 0
dahdi 175023 1 dahdi_voicebus
padlock_aes 3496 0
aes_generic 25641 1 padlock_aes
via_velocity 18428 0
via_rhine 13716 0
8139too 12900 0
mii 2663 2 via_rhine,8139too
rtc 3708 0
dahdi/system.conf:
fxsks=1 loadzone=uk defaultzone=uk echocanceller=mg2,1-4
chan_dahdi.conf:
[trunkgroups] [channels] loadzone=uk defaultzone=uk usecallerid=yes
ukcallerid=yes cidsignalling=v23 ; Added for UK CLI detection cidstart=polarity
; Added for UK CLI detection sendcalleridafter=1 callerid=asreceived ;
propagate the CID received from BT. group=1 callgroup=1 pickupgroup=1
context=from-zaptel group=1 signalling=fxs_ks channel = 1 rxwink=300
hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes
threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes
echocancel=yes echocancelwhenbridged=no faxdetect=incoming ;echotraining=800
rxgain=4.0 txgain=4.0
------------------------------------------------------------------------------
LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial
Remotely access PCs and mobile devices and provide instant support
Improve your efficiency, and focus on delivering more value-add services
Discover what IT Professionals Know. Rescue delivers
http://p.sf.net/sfu/logmein_12329d2d
_______________________________________________
Astlinux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
[email protected].
--
Dog is my Co-pilot
------------------------------------------------------------------------------
LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial
Remotely access PCs and mobile devices and provide instant support
Improve your efficiency, and focus on delivering more value-add services
Discover what IT Professionals Know. Rescue delivers
http://p.sf.net/sfu/logmein_12329d2d
_______________________________________________
Astlinux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
[email protected].
