If it's a 410, I think it might be DAHDIMODS=wct24xxp.

 

Tom

 

 

From: Ionel Chila [mailto:[email protected]] 
Sent: 15 December 2012 19:39
To: AstLinux Users Mailing List
Subject: Re: [Astlinux-users] DAHDI Configuration, Please Help! TDM410
(Possibly Clone) Card

 

Do you have DAHDIMODS="wctdm dahdi_echocan_oslec"  in your user.conf?

 

What's the output for #cat /proc/dahdi/*





And what's the output for CLI> dahdi show status









 

  _____  

From: Aaron Sarginson <[email protected]>
To: "[email protected]"
<[email protected]> 
Sent: Friday, December 14, 2012 8:27 PM
Subject: [Astlinux-users] DAHDI Configuration, Please Help! TDM410 (Possibly
Clone) Card

 

Hi,

 

I've been having problems configuring DAHDI for a TDM410 card with 1 FXO
module. 

The card was sourced from the auction site so could be a clone if that
matters.

I'm not sure about the span=... stuff in the astlinux documentation - if
it's for the POTS cards or not so have left it out of the configuration.

In the asterisk configuration web frontend, under analog trunks I have POTS
1 and "No FXO ports detected !!"

Could someone help me with this please?

 

Thank you

 

Aaron

 

 

 

Information:

lspci shows the card as:

 
00:08.0 Ethernet controller: Digium, Inc. Wildcard TDM410 4-port analog card
(rev 11)                                                    
 
lsmod gives:
Module                  Size  Used by

dahdi_voicebus         37303  0

dahdi                 175023  1 dahdi_voicebus

padlock_aes             3496  0

aes_generic            25641  1 padlock_aes

via_velocity           18428  0

via_rhine           
   13716  0

8139too                12900  0

mii                     2663  2 via_rhine,8139too

rtc                     3708  0

 
dahdi/system.conf:        
fxsks=1
loadzone=uk
defaultzone=uk
echocanceller=mg2,1-4
 
chan_dahdi.conf:
 
[trunkgroups]
    
[channels]
    loadzone=uk
    defaultzone=uk
    usecallerid=yes
    ukcallerid=yes
    cidsignalling=v23 ; Added for UK CLI detection
    cidstart=polarity ; Added for UK CLI detection
    sendcalleridafter=1
    callerid=asreceived ; propagate the CID received from BT.
    group=1
    callgroup=1
    pickupgroup=1
 
    context=from-zaptel
    group=1
    signalling=fxs_ks
    channel = 1
    rxwink=300
    hidecallerid=no
    callwaiting=yes
    usecallingpres=yes
    callwaitingcallerid=yes
    threewaycalling=yes
    transfer=yes
    canpark=yes
    cancallforward=yes
    callreturn=yes
    echocancel=yes
    echocancelwhenbridged=no
    faxdetect=incoming
    ;echotraining=800
    rxgain=4.0
    txgain=4.0
 


----------------------------------------------------------------------------
--
LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial
Remotely access PCs and mobile devices and provide instant support
Improve your efficiency, and focus on delivering more value-add services
Discover what IT Professionals Know. Rescue delivers
http://p.sf.net/sfu/logmein_12329d2d
_______________________________________________
Astlinux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/astlinux-users

Donations to support AstLinux are graciously accepted via PayPal to
[email protected].

------------------------------------------------------------------------------
LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial
Remotely access PCs and mobile devices and provide instant support
Improve your efficiency, and focus on delivering more value-add services
Discover what IT Professionals Know. Rescue delivers
http://p.sf.net/sfu/logmein_12329d2d
_______________________________________________
Astlinux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/astlinux-users

Donations to support AstLinux are graciously accepted via PayPal to 
[email protected].

Reply via email to