Ok my problem with my office system was not corrupt storage as I performed the same thing on my build system and it has done EXACTLY the same thing. I’m not going stupid (stupider) after all.
I upgraded to 1.2.7 i686 and then reverted to 1.2.6.1 i686 and this is what I receive when booting: ----- Runnix version 'runnix-0.4-7583' starting... Skip Verifying astlinux-1.2.6.1.run losetup: /mnt/base/os/astbio too big device loop0 (2 > 0) linux-1.2.6.1.ruEXT2-fs (loop0): error: unable to read superblock n: failed to setup loop device: No such file or directory mount: mounting /dev/loop0 on /mnt/root failed: Invalid argument Error mounting astlinux-1.2.6.1.run root fs Configuring eth0 with DHCP... udhcpc (v1.19.4) started r8169 0000:01:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168e-2.fw (-2) r8169 0000:01:00.0: eth0: link down r8169 0000:01:00.0: eth0: link down Sending discover... r8169 0000:01:00.0: eth0: link up Sending discover... Sending discover... No lease, failing Dropping to shell, type 'exit' to reboot /bin/sh: can't access tty; job control turned off runnix# ----- Certainly a significant problem. Any ideas? Regards Michael Knill ------------------------------------------------------------------------------ _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
