Thanks Lonnie that worked. You are a lifesaver ☺
Regards Michael Knill -----Original Message----- From: Lonnie Abelbeck <[email protected]> Reply-To: AstLinux List <[email protected]> Date: Thursday, 4 August 2016 at 10:06 AM To: AstLinux List <[email protected]> Subject: Re: [Astlinux-users] Still problems with 1.2.7 > Is there any way I can boot 1.2.7 again on my build APU as I am concerned I > have not backed up everything. You can mount the SSD via a USB dongle to a desktop system. Find the "ver" file in the "os" directory, edit it from "astlinux-1.2.6.1" to "astlinux-1.2.7", also ... find the "Xver" file in the "os" directory, edit it from "astlinux-1.2.7" to "astlinux-1.2.6.1", eject and reinstall into your APU1. Lonnie On Aug 3, 2016, at 6:23 PM, Michael Knill <[email protected]> wrote: > Yes my office system appears to be working fine after rebuild. > It's a Jetway NF96 I think using a SATA Transcend 2G flash. > > My build system is an APU with 32G Kingston mSATA. It also seemed to be > working fine until I reverted the upgrade. > PS I didn't revert because of a problem if that's what you are concerned > about. > > So Im pretty sure that 1.2.7 is working fine but Im a little concerned about > an upgrade considering there is currently no return. > > Is there any way I can boot 1.2.7 again on my build APU as I am concerned I > have not backed up everything. > > Regards > Michael Knill > > -----Original Message----- > From: Lonnie Abelbeck <[email protected]> > Reply-To: AstLinux List <[email protected]> > Date: Thursday, 4 August 2016 at 8:58 AM > To: AstLinux List <[email protected]> > Subject: Re: [Astlinux-users] Still problems with 1.2.7 > > Michael, > > I will look into that, but more importantly is AstLinux 1.2.7 working as > expected ? (given you solved your adaptive ban issue) > > What hardware are you using ? > > What flash meda to you have, size, type, and manufacturer ? > > Lonnie > > > On Aug 3, 2016, at 5:47 PM, Michael Knill <[email protected]> > wrote: > >> Ok my problem with my office system was not corrupt storage as I performed >> the same thing on my build system and it has done EXACTLY the same thing. >> I’m not going stupid (stupider) after all. >> >> I upgraded to 1.2.7 i686 and then reverted to 1.2.6.1 i686 and this is what >> I receive when booting: >> >> ----- >> Runnix version 'runnix-0.4-7583' starting... >> Skip Verifying astlinux-1.2.6.1.run >> losetup: /mnt/base/os/astbio too big device loop0 (2 > 0) >> linux-1.2.6.1.ruEXT2-fs (loop0): error: unable to read superblock >> n: failed to setup loop device: No such file or directory >> mount: mounting /dev/loop0 on /mnt/root failed: Invalid argument >> Error mounting astlinux-1.2.6.1.run root fs >> Configuring eth0 with DHCP... >> udhcpc (v1.19.4) started >> r8169 0000:01:00.0: eth0: unable to load firmware patch >> rtl_nic/rtl8168e-2.fw (-2) >> r8169 0000:01:00.0: eth0: link down >> r8169 0000:01:00.0: eth0: link down >> Sending discover... >> r8169 0000:01:00.0: eth0: link up >> Sending discover... >> Sending discover... >> No lease, failing >> Dropping to shell, type 'exit' to reboot >> /bin/sh: can't access tty; job control turned off >> runnix# >> ----- >> >> Certainly a significant problem. Any ideas? >> >> Regards >> Michael Knill >> >> ------------------------------------------------------------------------------ >> _______________________________________________ >> Astlinux-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/astlinux-users >> >> Donations to support AstLinux are graciously accepted via PayPal to >> [email protected]. > > > ------------------------------------------------------------------------------ > _______________________________________________ > Astlinux-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/astlinux-users > > Donations to support AstLinux are graciously accepted via PayPal to > [email protected]. > > > ------------------------------------------------------------------------------ > _______________________________________________ > Astlinux-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/astlinux-users > > Donations to support AstLinux are graciously accepted via PayPal to > [email protected]. ------------------------------------------------------------------------------ _______________________________________________ Astlinux-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [email protected]. ------------------------------------------------------------------------------ _______________________________________________ Astlinux-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [email protected].
