> Am 24.11.2020 um 06:34 schrieb Michael Knill > <michael.kn...@ipcsolutions.com.au>: > > Hi Group > > I'm wanting two external interfaces for my softswitch gateway with one > connecting to the internet and the other connecting to a direct Megaport > connection to my SIP provider. > I'm assuming that I can set up the following in user.conf: > EXT2IF="eth2" > EXT2IP="10.1.1.2" > EXT2NM="255.255.255.0" > EXT2GW="10.1.1.1" > EXT2ROUTES="<Provider routes here>"
You can do this in the WebGUI: Failover Interface eth2 The rest in the Failover tab, but disable failover. > > I also will have Failover disabled on the Failover tab. > > Is this workable? I'm assuming I will need common firewall entries for both > interfaces? Yes. > I have always only done this in a failover scenario with both interfaces > connected to the internet! > > Thanks all. > > Regards > Michael Knill Michael http://www.mksolutions.info _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
