Yep I thought that may be the case. Thanks Michael.
Regards
Michael Knill
On 24/11/20, 8:46 pm, "Michael Keuter" <li...@mksolutions.info> wrote:
> Am 24.11.2020 um 06:34 schrieb Michael Knill
<michael.kn...@ipcsolutions.com.au>:
>
> Hi Group
>
> I'm wanting two external interfaces for my softswitch gateway with one
connecting to the internet and the other connecting to a direct Megaport
connection to my SIP provider.
> I'm assuming that I can set up the following in user.conf:
> EXT2IF="eth2"
> EXT2IP="10.1.1.2"
> EXT2NM="255.255.255.0"
> EXT2GW="10.1.1.1"
> EXT2ROUTES="<Provider routes here>"
You can do this in the WebGUI:
Failover Interface eth2
The rest in the Failover tab, but disable failover.
>
> I also will have Failover disabled on the Failover tab.
>
> Is this workable? I'm assuming I will need common firewall entries for
both interfaces?
Yes.
> I have always only done this in a failover scenario with both interfaces
connected to the internet!
>
> Thanks all.
>
> Regards
> Michael Knill
Michael
http://www.mksolutions.info
_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
pay...@krisk.org.
_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
pay...@krisk.org.
