Yes, as long as you don't require PPPoE on the 2nd WAN (Failover) interface.
Lonnie > On Nov 24, 2020, at 3:55 AM, Michael Knill > <michael.kn...@ipcsolutions.com.au> wrote: > > Yep I thought that may be the case. Thanks Michael. > > Regards > Michael Knill > > On 24/11/20, 8:46 pm, "Michael Keuter" <li...@mksolutions.info> wrote: > > >> Am 24.11.2020 um 06:34 schrieb Michael Knill >> <michael.kn...@ipcsolutions.com.au>: >> >> Hi Group >> >> I'm wanting two external interfaces for my softswitch gateway with one >> connecting to the internet and the other connecting to a direct Megaport >> connection to my SIP provider. >> I'm assuming that I can set up the following in user.conf: >> EXT2IF="eth2" >> EXT2IP="10.1.1.2" >> EXT2NM="255.255.255.0" >> EXT2GW="10.1.1.1" >> EXT2ROUTES="<Provider routes here>" > > You can do this in the WebGUI: > Failover Interface eth2 > The rest in the Failover tab, but disable failover. > >> >> I also will have Failover disabled on the Failover tab. >> >> Is this workable? I'm assuming I will need common firewall entries for both >> interfaces? > > Yes. > >> I have always only done this in a failover scenario with both interfaces >> connected to the internet! >> >> Thanks all. >> >> Regards >> Michael Knill > > Michael > > http://www.mksolutions.info _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
