> On Feb 5, 2022, at 11:09 AM, Ionel Chila via Astlinux-users 
> <astlinux-users@lists.sourceforge.net> wrote:
> 
> I had this dedicated box with a Digium Wildcard TDM410 running forever, 
> thanks for all the hard work that is put into this great project.  I run few 
> SIP trunks on this home PBX with VOIP providers from Europe, Asia and US as I 
> have family all over the world.  I also use this for some automation tasks, 
> so the need for the FXO and FXS modules besides my home line.
> 
> I am in process of consolidating some of my small servers into a beefy VmWare 
> Esxi 7.0 server and I was wondering if migrating from this current physical 
> PBX to VmWare will work.  The only part I am not sure in VmWare is about 
> TDM410. Will this  TDM410 card still work properly even in the virtual 
> environment, of course after putting the card in passthrough mode. Does 
> anyone have a similar working setup?
> 
> https://doc.astlinux-project.org/userdoc:guest_vm_vmware_vsphere
> 
> Thanks
> Ionel Chila

The TDM410 is PCI not PCIe, so you have a "beefy VmWare Esxi 7.0 server" with 
PCI?

While possible, (I have never done it) I would consider reserving one of your 
old boxes with PCI as a home-built SIP/ATA using AstLinux.

Lonnie




_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users

Donations to support AstLinux are graciously accepted via PayPal to 
pay...@krisk.org.

Reply via email to