> Am 05.02.2022 um 18:50 schrieb Lonnie Abelbeck <li...@lonnie.abelbeck.com>:
>
>>
>> On Feb 5, 2022, at 11:09 AM, Ionel Chila via Astlinux-users
>> <astlinux-users@lists.sourceforge.net> wrote:
>>
>> I had this dedicated box with a Digium Wildcard TDM410 running forever,
>> thanks for all the hard work that is put into this great project. I run few
>> SIP trunks on this home PBX with VOIP providers from Europe, Asia and US as
>> I have family all over the world. I also use this for some automation
>> tasks, so the need for the FXO and FXS modules besides my home line.
>>
>> I am in process of consolidating some of my small servers into a beefy
>> VmWare Esxi 7.0 server and I was wondering if migrating from this current
>> physical PBX to VmWare will work. The only part I am not sure in VmWare is
>> about TDM410. Will this TDM410 card still work properly even in the virtual
>> environment, of course after putting the card in passthrough mode. Does
>> anyone have a similar working setup?
>>
>> https://doc.astlinux-project.org/userdoc:guest_vm_vmware_vsphere
>>
>> Thanks
>> Ionel Chila
>
> The TDM410 is PCI not PCIe, so you have a "beefy VmWare Esxi 7.0 server" with
> PCI?
>
> While possible, (I have never done it) I would consider reserving one of your
> old boxes with PCI as a home-built SIP/ATA using AstLinux.
>
> Lonnie
Or use physical ATAs from Cisco, Yeastar, Grandstream via SIP instead.
That works without VM issues (only configuring th ATAs, which can be tricky as
well).
Michael
http://www.mksolutions.info
_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
pay...@krisk.org.
