> On Feb 5, 2022, at 11:50 AM, Lonnie Abelbeck <li...@lonnie.abelbeck.com> 
> wrote:
> 
>> 
>> On Feb 5, 2022, at 11:09 AM, Ionel Chila via Astlinux-users 
>> <astlinux-users@lists.sourceforge.net> wrote:
>> 
>> I had this dedicated box with a Digium Wildcard TDM410 running forever, 
>> thanks for all the hard work that is put into this great project.  I run few 
>> SIP trunks on this home PBX with VOIP providers from Europe, Asia and US as 
>> I have family all over the world.  I also use this for some automation 
>> tasks, so the need for the FXO and FXS modules besides my home line.
>> 
>> I am in process of consolidating some of my small servers into a beefy 
>> VmWare Esxi 7.0 server and I was wondering if migrating from this current 
>> physical PBX to VmWare will work.  The only part I am not sure in VmWare is 
>> about TDM410. Will this  TDM410 card still work properly even in the virtual 
>> environment, of course after putting the card in passthrough mode. Does 
>> anyone have a similar working setup?
>> 
>> https://doc.astlinux-project.org/userdoc:guest_vm_vmware_vsphere
>> 
>> Thanks
>> Ionel Chila
> 
> The TDM410 is PCI not PCIe, so you have a "beefy VmWare Esxi 7.0 server" with 
> PCI?
> 
> While possible, (I have never done it) I would consider reserving one of your 
> old boxes with PCI as a home-built SIP/ATA using AstLinux.
> 
> Lonnie

Update Ionel,

No, using a DAHDI card will not work in a VM, as least with the standard builds 
as the Digium hardware firmware is not installed for genx86_64-vm builds.

Building you own SIP/ATA gateway is the best option ... or leave a working 
solution alone :-)

Lonnie




_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users

Donations to support AstLinux are graciously accepted via PayPal to 
pay...@krisk.org.

Reply via email to