Hi, Tying to upstream BDFs of GL.iNet GL-B1300 to ath10k-firmware. This router uses two changed BDFs based on boardData_1_0_IPQ4019_Y9803_wifi0.bin & boardData_1_0_IPQ4019_Y9803_wifi1.bin. We changed BDF for target power of both BDFs and FEM control parameter antCtrlCommon2_G_0_0 of boardData_1_0_IPQ4019_Y9803_wifi0.
I'm not quite sure if ath10k driver need to add these two changed BDF
to work properly
for this board.
I think the ART data is made based on BDF. Maybe the antCtrlCommon logic
and target power parameter is passed to driver by ART but not BDF?
That way we're all happier no need to mantain these change. Please advise.
Now to the questions from the wiki page [1]:
* description for what hardware this is:
- it is a IPQ4028 based router. More information [2]
* origin of the board file (did you create it yourself or where you
downloaded)
- we create it. Can also be extracted from manufacturer firmware[3].
* ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
- bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=GL-B1300
sha256sum: 34d5b821826aad1699666ec95df19a1767245ab424068161275a7ace947eedee
- bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=GL-B1300
sha256sum: d0abd802b3d04b51f4a40883157e86b1ff3a204c660d0aa3365ae8e55f625a3e
* attach the actual board file (board.bin)
- The name of the files are equal to the id string in the board-2.bin
(minus the ".bin")
Many thanks to Sven for his guidance.
[1] https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles
[2]
https://github.com/openwrt/openwrt/commit/04d3308b6248ef21a6f0bc3378b342906c2d2865
[3] http://www.gl-inet.com/firmware/b1300/clean/
bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=GL-B1300.bin
Description: Binary data
bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=GL-B1300.bin
Description: Binary data
_______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
