Dongming Han <[email protected]> writes: > Tying to upstream BDFs of GL.iNet GL-B1300 to ath10k-firmware. > This router uses two changed BDFs based on > boardData_1_0_IPQ4019_Y9803_wifi0.bin & boardData_1_0_IPQ4019_Y9803_wifi1.bin. > We changed BDF for target power of both BDFs and FEM control parameter > antCtrlCommon2_G_0_0 of boardData_1_0_IPQ4019_Y9803_wifi0. > > I'm not quite sure if ath10k driver need to add these two changed BDF > to work properly > for this board. > > I think the ART data is made based on BDF. Maybe the antCtrlCommon logic > and target power parameter is passed to driver by ART but not BDF? > That way we're all happier no need to mantain these change. Please advise. > > Now to the questions from the wiki page [1]: > > * description for what hardware this is: > > - it is a IPQ4028 based router. More information [2] > > * origin of the board file (did you create it yourself or where you > downloaded) > > - we create it. Can also be extracted from manufacturer firmware[3]. > > * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k) > > - bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=GL-B1300 > sha256sum: 34d5b821826aad1699666ec95df19a1767245ab424068161275a7ace947eedee > - bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=GL-B1300 > sha256sum: d0abd802b3d04b51f4a40883157e86b1ff3a204c660d0aa3365ae8e55f625a3e > > * attach the actual board file (board.bin) > > - The name of the files are equal to the id string in the board-2.bin > (minus the ".bin")
Added now, please check: https://github.com/kvalo/ath10k-firmware/commit/3af9ae584691acbe2356e30fac8380ad4840d8a6 New: bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=GL-B1300 Changed: Deleted: 1 board image(s) added, 0 changed, 0 deleted, 18 in total New: bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=GL-B1300 Changed: Deleted: 1 board image(s) added, 0 changed, 0 deleted, 19 in total -- Kalle Valo _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
