Hi, The support for this device was added a while ago to OpenWrt. This AP requires two special BDFs to get the Wi-Fi PHYs working (correctly). The bmi-board- id='s would clash with one of the the IPQ401X AP-DK boards because QCA doesn't provide special IDs for customers and seems to use the AP-DK board-ids in the wifi firmware to change its behavior.
Now to the questions from the wiki page [1]:
* description for what hardware this is:
- it is a IPQ4029 based board
- one QCA40xx radio is used as 2.4GHz radio
- one QCA40xx radio is used as 5GHz radio
* origin of the board file (did you create it yourself or where you
downloaded)
- Chris didn't include this info in the OpenWrt commit (maybe he can add it
here)
- most likely taken from stock firmware image
* ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
- QCA4019 hw1.0
+ bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=Meraki-MR33
sha256sum:
44e8e733d5fc9bd747520d492c776a6fa4cd7effed69098aeb6f9d437785ebad
+ bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=Meraki-MR33
sha256sum:
e816565130fae895cfa0c1760cfb47703f1bc5f24ce87922f86e94d4e2b6ccd2
* attach the actual board file (board.bin)
- The name of the files are equal to the id string in the board-2.bin
(minus the ".bin")
Kind regards,
Sven
[1] https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles
bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=Meraki-MR33.bin
Description: Binary data
bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=Meraki-MR33.bin
Description: Binary data
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
