Sven Eckelmann <[email protected]> writes: > The support for this device was added a while ago to OpenWrt. This AP > requires > two special BDFs to get the Wi-Fi PHYs working (correctly). The bmi-board- > id='s would clash with one of the the IPQ401X AP-DK boards because QCA > doesn't > provide special IDs for customers and seems to use the AP-DK board-ids in the > wifi firmware to change its behavior. > > Now to the questions from the wiki page [1]: > > * description for what hardware this is: > > - it is a IPQ4029 based board > - one QCA40xx radio is used as 2.4GHz radio > - one QCA40xx radio is used as 5GHz radio > > * origin of the board file (did you create it yourself or where you > downloaded) > > - Chris didn't include this info in the OpenWrt commit (maybe he can add it > here) > - most likely taken from stock firmware image > > * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k) > > - QCA4019 hw1.0 > > + bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=Meraki-MR33 > sha256sum: > 44e8e733d5fc9bd747520d492c776a6fa4cd7effed69098aeb6f9d437785ebad > + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=Meraki-MR33 > sha256sum: > e816565130fae895cfa0c1760cfb47703f1bc5f24ce87922f86e94d4e2b6ccd2 > > * attach the actual board file (board.bin) > > - The name of the files are equal to the id string in the board-2.bin > (minus the ".bin")
I added these now, please check that I did it correctly. It's very easy for me to make a mistake. https://github.com/kvalo/ath10k-firmware/commit/66be3a48d9cf17ace8413cf478a5954483393af4 -- Kalle Valo _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
