On Tue, Apr 17, 2018 at 3:15 AM, Sven Eckelmann <[email protected]> wrote: > Hi, > > The support for this device was added a while ago to OpenWrt. This AP requires > two special BDFs to get the Wi-Fi PHYs working (correctly). The bmi-board- > id='s would clash with one of the the IPQ401X AP-DK boards because QCA doesn't > provide special IDs for customers and seems to use the AP-DK board-ids in the > wifi firmware to change its behavior. > > Now to the questions from the wiki page [1]: > > * description for what hardware this is: > > - it is a IPQ4029 based board > - one QCA40xx radio is used as 2.4GHz radio > - one QCA40xx radio is used as 5GHz radio > > * origin of the board file (did you create it yourself or where you > downloaded) > > - Chris didn't include this info in the OpenWrt commit (maybe he can add it > here) > - most likely taken from stock firmware image > > * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k) > > - QCA4019 hw1.0 > > + bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=Meraki-MR33 > sha256sum: > 44e8e733d5fc9bd747520d492c776a6fa4cd7effed69098aeb6f9d437785ebad > + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=Meraki-MR33 > sha256sum: > e816565130fae895cfa0c1760cfb47703f1bc5f24ce87922f86e94d4e2b6ccd2 > > * attach the actual board file (board.bin) > > - The name of the files are equal to the id string in the board-2.bin > (minus the ".bin") > > Kind regards, > Sven > > [1] https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles
Hello, For the Meraki MR33, the board file was pulled out of the factory firmware image with assistance from Christian Lamparter, who I have CCd to this thread. Regards, Chris Blake _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
