On Tue, Apr 12, 2011 at 10:02 PM, Hasan Rashid <hras...@avionica.com> wrote:
>
> I found out the issue is not with the hardware or ath9k. It is with the
> tablet that I am using. On my Dell Vostro 1520 the pci device ID is reported
> correctly without any issues. On the tablet the same card is reported as an
> Ethernet Controller and the bogus vendor id.

good that you found it out!

>
> On another note, even with the correct vendor id, regardless of AP or
> Station mode, the transmit rate is still limited 54MBit/sec.

does this behaviour is still happening with the Windows driver?

>
> For now, I think we can close this thread on the note that the bogus vendor
> id is not an ath9k issue.
>
> Thanks for all the help.
>
> -----Original Message-----
> From: Mohammed Shafi [mailto:shafi.at...@gmail.com]
> Sent: Tue 4/12/2011 7:46 AM
> To: Hasan Rashid
> Cc: ath9k-devel@lists.ath9k.org
> Subject: Re: [ath9k-devel] Sparklan WPEA-121N AR9382 168c:abcd
>
> On Mon, Apr 11, 2011 at 11:24 PM, Hasan Rashid <hras...@avionica.com> wrote:
>>
>> I have attached the driver load output in dmesg.
>>
>> By the way why does AR9382 require Kernel 2.6.36 or higher? Can you list
>> the major requirements?
>
> because the hardware code(HAL) will be present from that kernel version
> only.
>>
>> Hasan R.
>>
>> -----Original Message-----
>> From: ath9k-devel-boun...@lists.ath9k.org
>> [mailto:ath9k-devel-boun...@lists.ath9k.org] On Behalf Of Peter Stuge
>> Sent: Monday, April 11, 2011 12:20 PM
>> To: ath9k-devel@lists.ath9k.org
>> Subject: Re: [ath9k-devel] Sparklan WPEA-121N AR9382 168c:abcd
>>
>> Mohammed Shafi wrote:
>>> to make sure that HT is configured in driver please do this
>>>
>>> diff --git a/drivers/net/wireless/ath/ath9k/hw.c
>>> b/drivers/net/wireless/ath/ath9k/hw.c
>>> index 1b5bd13..720a866 100644
>>> --- a/drivers/net/wireless/ath/ath9k/hw.c
>>> +++ b/drivers/net/wireless/ath/ath9k/hw.c
>>> @@ -1855,6 +1855,8 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
>>>         else
>>>                 pCap->hw_caps &= ~ATH9K_HW_CAP_HT;
>>>
>>> +               pCap->hw_caps |= ATH9K_HW_CAP_HT;
>>> +
>>
>> The indentation is off, or do you mean to include the added line only
>> within the else block? If so, remember to add braces.
>>
>>
>> //Peter
>> _______________________________________________
>> ath9k-devel mailing list
>> ath9k-devel@lists.ath9k.org
>> https://lists.ath9k.org/mailman/listinfo/ath9k-devel
>>
>> This communication contains information that may be confidential or
>> privileged. The information is solely intended for the use of the addressee.
>> If you are not the intended recipient, be advised that any disclosure, copy,
>> distribution, or use of the contents of this communication is prohibited. If
>> you have received this communication in
>> error, please immediately notify the sender by telephone or by electronic
>> mail.
>> _______________________________________________
>> ath9k-devel mailing list
>> ath9k-devel@lists.ath9k.org
>> https://lists.ath9k.org/mailman/listinfo/ath9k-devel
>>
>>
>
> This communication contains information that may be confidential or
> privileged. The information is solely intended for the use of the addressee.
> If you are not the intended recipient, be advised that any disclosure, copy,
> distribution, or use of the contents of this communication is prohibited. If
> you have received this communication in
> error, please immediately notify the sender by telephone or by electronic
> mail.
_______________________________________________
ath9k-devel mailing list
ath9k-devel@lists.ath9k.org
https://lists.ath9k.org/mailman/listinfo/ath9k-devel

Reply via email to