> -------- Original Message -------- > Subject: Re: [ATrpms-users] CentOS kernel upgrade=no pvr150 cards > From: Paulo Cavalcanti <[email protected]> > Date: Sun, January 24, 2010 2:41 pm > To: Don Bossung <[email protected]> > Cc: [email protected] > On Sun, Jan 24, 2010 at 7:26 PM, Don Bossung <[email protected]> wrote: > > I have a CentOS base (5.4) that was running kernel > > 2.6.18-164.10.1.el5.centos.plus x86_64 SMP. > > > > I recently added an nvidia 9500 video card and when I dl'd the > > nvidia-graphics package it pulled > > nvidia-graphics190.53-kmdl-2.6.18-164.11.1.el5.centos.plus along with > > kernel 2.6.18-164.11.1.el5.centos.plus. > > > > When I reboot, my 2 pvr150s are not in dev. They show up in lspci, they > > show up in the machines bios, but /dev/video0 and /dev/video1 do not > > show up. When I downgrade back to 2.6.18-164.10.1.el5.centos.plus kernel > > and reboot, video0 and video1 come back. The problem I am running into > > now is that I cannot get the nvidia kmdl for kernel > > 2.6.18-164.10.1.el5.centos.plus and such cannot use the new card. > > > > Any ideas of how to proceed troubleshooting this? Is there another > > upgrade/problem to deal with? > > > > > Do you have video4linux installed? > If not, try installing it. Otherwise, > try downgrading module-init-tools to this version: > module-init-tools-3.3-0.pre3. > 1.42.el5 > -- > Paulo Roma Cavalcanti > LCG - UFRJ
video4linux = 1:20090907-91.el5 Note: the pvr150s were working well until the kernel upgrade to 2.6.18-165.11 Not to be dense, but could you give me a push toward the downgrade? The module-init-tools on the CentOS 5.4 DVD and at atrpms is 1.54, which is the same version before the kernel upgrade when things were working. Don _______________________________________________ atrpms-users mailing list [email protected] http://lists.atrpms.net/mailman/listinfo/atrpms-users
