Sorry for being such a noob. I did some searching and found the item
with the reference to the new patch. I d/l'd it and then installed.
It worked fine. So, now I have the patched parted.
I did notice that when I checked the partition table that the Flag
didn't set as atvrecv. this is going to be a problem, I think. How
do I set the flag without rebuilding the drive and partitions?
Again, sorry about the post without search action.
sudo parted -s /dev/sdc unit s print
Model: SanDisk Cruzer (scsi)
Disk /dev/sdc: 3940479s
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Number Start End Size File system Name Flags
1 40s 69671s 69632s hfs+ primary
parted -s /dev/sdc set 1 atvrecv on
if it does not show up or errors, you are not using the right parted,
you could have two parted binaries in the path and it's picking the
wrong one first.
sudo find / -name parted
^^ will find them all.
--
To post to this group, send email to [email protected]
For more options, visit this group at
http://groups.google.com/group/atv-bootloader?hl=en
